132lb US Wood MBTA MRT

132lb US Wood MBTA MRT

MBTA commuter rail track from my own digital photographs, done as mesh reducing track, MRT. It has 1134/94 polys per spline segment. It is a high poly track and will not be suitable for all uses in Trainz. Revised to add rail anchors. Revised to modify rail anchor spacing to every other tie.

Author: George Fisher

132lb US Wood MBTA MRT
• 132lb us wood mbta_mrt.im 74.01KB
132lb us wood mbta_um
132lb us wood mbta_um.im 10.29KB
ballast-ballast.texture.txt 49 bytes
ballast.bmp 192.05KB
ballast.texture.txt 30 bytes
ballast.tga 192.04KB
rail bottom flange top.bmp 3.05KB
rail bottom flange top.texture.txt 45 bytes
rail bottom.bmp 824 bytes
rail bottom.texture.txt 34 bytes
rail side.bmp 48.05KB
rail side.texture.txt 32 bytes
rail top.bmp 96.05KB
rail top.texture.txt 31 bytes
tie end.bmp 48.05KB
tie end.texture.txt 30 bytes
tie side.bmp 24.05KB
tie side.texture.txt 31 bytes
tie top.bmp 192.05KB
tie top.texture.txt 30 bytes
• ballast-ballast.texture.txt 49 bytes
• ballast.bmp 192.05KB
• ballast.texture.txt 30 bytes
• ballast.tga 192.04KB
• config.txt 2.09KB
• rail bottom flange top.bmp 3.05KB
• rail bottom flange top.texture.txt 45 bytes
• rail bottom.bmp 824 bytes
• rail bottom.texture.txt 34 bytes
• rail side.bmp 48.05KB
• rail side.texture.txt 32 bytes
• rail top.bmp 96.05KB
• rail top.texture.txt 31 bytes
• thumbnail-mbtatrack.jpg 34.77KB
• thumbnail.jpg 34.88KB
• tie end.bmp 48.05KB
• tie end.texture.txt 30 bytes
• tie plate.bmp 24.05KB
• tie plate.texture.txt 32 bytes
• tie side.bmp 24.05KB
• tie side.texture.txt 31 bytes
• tie top.bmp 192.05KB
• tie top.texture.txt 30 bytes

Free. May be used as you see fit, including modifications and reskins.

VE48: This asset uses an obsolete trainz-build number. Trainz-build numbers below 3.5 are no longer supported.
VE39: The texture '132lb us wood mbta_um/rail bottom.bmp' is a uniform color.
VE39: The texture 'rail bottom.bmp' is a uniform color.