MRBK Wood Trestle 02

MRBK Wood Trestle 02

Moffat Road Bridge Kit

Inner section for MRBK wooden trestles

Needs a 'MRBK Wood Trestle End 02' or similar on each end to complete the frame bents.

This is a 'Rails' track asset, so it can be curved and straightened like regular track.
Spline points should be adjusted so the ties are square when viewed from the side.

Running Rail Weight: 80#
Mesh Length: 16ft (4.876m)

Poly Count (per gmax): 796

Wood texture is modified from 'd81' from 3Dviewport.com.

Suggestions for improvement are welcome!

Author: Eric Jacobsen

MRBK Wood Trestle 02
• config.txt 2.93KB
• license.txt 719 bytes
• mrbk_wood_trestle_02.im 62.29KB
• rail2.texture.txt 28 bytes
• rail2.tga 4.04KB
• woodtrestletexture2.texture.txt 42 bytes
• woodtrestletexture2.tga 768.04KB
• woodtrestletrack2.texture.txt 40 bytes
• woodtrestletrack2.tga 384.04KB

This Content Asset was originally created by Eric Jacobsen.
email address: [email protected]
Auran Username: eejacobsen
Auran User ID: 126054

No warranty of any kind is granted or implied with this Content Asset. Eric Jacobsen may not be held responsible for any damages of any kind that result from discovering, acquiring, installing, using, or referencing this Content Asset.

Permission is granted to use or reference this Content Asset as part of any "freeware" Route.

Any other use, redistr

VE45: The tag '#length' is not permitted within a container of type 'obsolete-track'.
VE45: The tag '##' is not permitted within a container of type 'obsolete-track'.

VE48: This asset uses an obsolete trainz-build number. Trainz-build numbers below 3.5 are no longer supported.
VE61: Required tag 'width' was missing and has been set to default.
VE62: Required container 'thumbnails' is missing.