NSW Sign | Intermediate Trip Speed

NSW Sign | Intermediate Trip Speed

NSW Speed Sign | Intermediate Tip
These signs are palced before intermediate train stops. If the signal beyond this sign indicates STOP then the train speed must be at or below the indicated speed before passing the sign.

The following can also be customised:
• Speed Units (KPH or MPH)
• Mounting position (default positions for use in TRS19 and classic Surveyor)
• Visibility of the post/mount
• Visibility of each sign
• Enable or disable speed limits. If all limits are disabled then no speed limit will be applied.

Note: By default, this sign does not apply any speed limits.

NSW Sign | Intermediate Trip Speed
• config.txt 7.48KB
• icon.jpg 42.97KB
mesh
target.trainzmesh 393 bytes
• speedsign.gs 378 bytes