NSW Sign | 1 Speed Advisory

NSW Sign | 1 Speed Advisory

NSW Speed Sign | Advisory - 1 Speed
This sign is used when there is not enough distance to allow drivers to see the signal ahead. Trains must slow to the speed indicated when approaching the signal and must not resum normal speed until the signal is clear.

Can be configured to display:
• General or
• Freight or
• XPT

The following can also be customised:
• Speed Units (KPH or MPH)
• Mounting position (default positions for use in TRS19 and classic Surveyor)
• Visibility of the post/mount
• Visibility of each sign
• Enable or disable speed limits. If all limits are disabled then no speed limit will be applied.

Note: By default, this sign does not apply any speed limits.

NSW Sign | 1 Speed Advisory
• config.txt 16.32KB
• icon.jpg 42.97KB
mesh
target.trainzmesh 393 bytes
• speedsign.gs 329 bytes