Selby Swing Bridge 6

Selby Swing Bridge 6

This is an interactive single track (by request) offset swing bridge based on the span over the
Ouse River about 12 miles south of York with different textures. This is is designed to be triggered to open when some form
of water traffic which has been set up as a locomotive comes within the trigger radius on the 2 invisible tracks in the water.
This takes 450 keyframes (approximately 15 seconds) to close so don't drive too fast. Many thanks to ECML Stuart for the
pics and info.
The blue invisible track is at ground level (z axis = 0 ft 0.0 in).
The green invisible track is at z axis = -10 meters (-32 ft 9.0 in) below ground level.
Water level should be set at -3 meters (-9 ft 10 in) below ground level.
IMPORTANT! Rail traffic across the bridge can be made interactive in Surveyor. See the README file in the folder for instructions.

Author: Benjamin R. Dorsey

Selby Swing Bridge 6
• anim.kin 31.85KB
• bascule.im 1.22MB
• black.bmp 3.05KB
• black.texture.txt 28 bytes
• concrete 13.jpg 24.66KB
• concrete 13.texture.txt 34 bytes
• concrete10.jpg 1.83KB
• concrete10.texture.txt 33 bytes
• concrete6.jpg 33.12KB
• concrete6.texture.txt 32 bytes
• config.txt 3.23KB
• darkgrey.bmp 3.05KB
• darkgrey.texture.txt 31 bytes
• metal5.jpg 18.84KB
• metal5.texture.txt 29 bytes
• metal6.jpg 47.37KB
• metal6.texture.txt 29 bytes
• navygrey.bmp 12.05KB
• navygrey.texture.txt 31 bytes
• wall_29.jpg 41.26KB
• wall_29.texture.txt 30 bytes
• wood17.jpg 218.85KB
• wood17.texture.txt 29 bytes
• wood2.texture.txt 28 bytes
• wood2.tga 49.04KB

This item is offered free of charge for your enjoyment. It may not be sold or used in any commercial venture. It may be re-skinned for your personal use.