Hicapyflat 6 body

Hicapyflat 6 body

Some flatcar loads while relativly small were so heavy they exceded the axle loading limit for a standard (2 bogie) flatcar.
Several Railroads modified flatcars by replacing the normal 2 bogies with two bolsters with bogies at each end which then attached to the
underside of the car body in the same manner as the original single bogie. This reduces the axle loading by almost half. This is the body section
of an empty car with an attachment point (a.load0) in the center. Down-loaders can make custom loads and attach them to this car, Assemble this
car in Surveyor by placing the body section on the track then select the bolster (kuid2:210518:6501:1) and place them half way between the center
of the body and each end. When properly assembled there will onl;y be 1 red and 1 green arrow and the car will move as a unit.

Author: Benjamin R. Dorsey

Hicapyflat 6 body
• black.bmp 3.05KB
• black.texture.txt 28 bytes
• config.txt 3.24KB
• dark grey.bmp 12.05KB
• dark grey.texture.txt 32 bytes
• hicapyflat_6_body.im 89.46KB
• light grey.bmp 822 bytes
• light grey.texture.txt 33 bytes
• wood2.jpg 121.70KB
• wood2.texture.txt 28 bytes

This item is offered free of charge for your enjoyment. It may not be sold or used in any commercial venture. It may be re-skinned for your personal use.