Hicapyflat 17 Body

Hicapyflat 17 Body

This is the body section (the pic shows the complete car) of an interactive articulated flat car with
four 4-wheel roller bearing bogeys. This is a generic version of my NASA_SRB cars for those who would like to use the
car for other loads and purposes. There is an attachment point (a.load0) in the center of the car. The generic lettering
can be changed by manipulating the size, color, and text values in the effects section of the config file. Many thanks to
Conn McCarthy for the use of his 36in 100t Trucks. Assemble this car in Surveyor as follows:
1. Place Hicapyflat_17_Body (this item) on the track.
2. Place Hicapyflat_17_F_Bolster on the track beyond one end of the body.
3. Place Hicapyflat_17_R_Bolster on the track beyond the other end of the car.
4. Rotate one bolster 180 degrees to get the coupler facing outward.
5. Move the bolsters under the ends of the body.
6. When properly assembled there will only be 1 red and 1 green arrow and the car will move as a unit.

Author: Benjamin R. Dorsey

Hicapyflat 17 Body
• black.bmp 3.05KB
• black.texture.txt 28 bytes
• brass.bmp 822 bytes
• brass.texture.txt 28 bytes
• config.txt 6.40KB
• dark grey.bmp 12.05KB
• dark grey.texture.txt 32 bytes
• hicapyflat_17_body.im 109.76KB
• light grey.bmp 822 bytes
• light grey.texture.txt 33 bytes

This item is offered free of charge for your enjoyment. It may not be sold or used in any commercial venture. It may be re-skinned for your personal use.