Hicapyflat 20 body

Hicapyflat 20 body

A 4 bogey flat with a four cylinder crank shaft for a stationary steam engine as the load.
To assemble this car in Surveyor, work from the center outward:
1. Place the body section (this item) on the track.
2. Place a bolster (kuid2:210518:6501:1) on the track beyond each end of the car.
3. Move the bolsters under the car about half way between the center of the body and each end.
4. When properly assembled there will only be one red and one green arrow and the car will move as a unit.

Author: Benjamin R. Dorsey

Hicapyflat 20 body
• black.bmp 3.05KB
• black.texture.txt 28 bytes
• config.txt 2.67KB
• dark grey.bmp 12.05KB
• dark grey.texture.txt 32 bytes
• light grey.bmp 822 bytes
• light grey.texture.txt 33 bytes
• metal2.jpg 43.23KB
• metal2.texture.txt 29 bytes
• part_1.im 198.25KB
• part_2.im 1.21MB
• planks23.jpg 15.33KB
• planks23.texture.txt 31 bytes
• wood2.jpg 23.21KB
• wood2.texture.txt 28 bytes

This item is offered free of charge for your enjoyment. It may not be sold or used in any commercial venture. It may be re-skinned for your personal use.