14 in USN 1919 Railgun 2

14 in USN 1919 Railgun 2

This is the gun and gun carriage to a 14 inch United States Navy railgun circa 1919
set up for firing.
To assemble this car in Surveyor, work from the center outward:
1. Place the body section (this item) on the track.
2. Place a front bolster (kuid2:210518:7025:1) on the track beyond the front end of the car body.
3. Place a rear bolster (kuid2:210518:7026:1) on the track beyond the rear end of the car body.
3. Rotate one bolster assembly as required for symetrical spacing under the car body.
4. Move the bolsters under the car about half way between the center of the body and each end.
5. When properly assembled there will only be one red and one green arrow and the car will move as a unit.

Author: Benjamin R. Dorsey

14 in USN 1919 Railgun 2
• config.txt 2.73KB
• dark grey.bmp 12.05KB
• dark grey.texture.txt 32 bytes
• part_1.im 1.08MB
• part_2.im 417.89KB

This item is offered free of charge for your enjoyment. It may not be sold or used in any commercial venture. It may be re-skinned for your personal use.