Queenstown to Regatta Point

Queenstown to Regatta Point

This route is very loosely based on the West Coast Wilderness Railway in Tasmania. I say very loosely as the route has been compiled from 12,000 miles away with little in the way of technical information. A word about compromises:
The signalling and speed limits are entirely as decided by me. Note the signalling is set up more to allow trains to follow each other across the route, as I believe happens on the prototype, rather than to cross opposing movements. The mid section of the route is equipped with an ABT rack rail but there is no suitable component on the DLS so this has been ommitted. The gradient on this section reaches up to 5.8% (and Trainz has made it steeper in a few places) so most normal 42' motive power will not work in realistic mode. The route will probably need to be driven in DCC (arcade) mode, or let the AI drive and admire the scenery instead!

A quick word about licencing - this route is uploaded as freeware under the DLS T&C. If anyone wants to upddate, change or turn it upside down be my guest - just please reference old Big Vern as the original author in the credits.

Above all, have fun!
Vern, April 2018.

Queenstown to Regatta Point
• config.txt 43.21KB
• mapfile.bmk 330 bytes
• mapfile.gnd 249.49MB
• mapfile.lyr 64 bytes
• mapfile.obs 43.32MB
• mapfile.rlr 36 bytes
• mapfile.trc 32 bytes
• mapfile.trk 109.76KB
• thumbnail.jpg 29.95KB
• wcw2_transdem_info.txt 835 bytes