Crank for 90 deg redirection, non-inverting high-low, 1x1, NSWGR

Crank for 90 deg redirection, non-inverting high-low, 1x1, NSWGR

A crank to change the direction of point rodding <kuid:368725:30062> by 90 degrees. It is decribed as 'non-inverting' because, if the rod incoming to the crank is pushed, the outgoing rod is pushed.
In this variation of asset 20086, the input side is high (0.144m above ground) and the output side is low (0.072m). Intended for use where rodding passes under track and ground level has submerged the ballast.

Author: Leigh Stokes (ElStoko)

Crank for 90 deg redirection, non-inverting high-low, 1x1, NSWGR
• base.im 1.84KB
• config.txt 2.58KB
• crank-crank.texture.txt 45 bytes
• crank-low.im 28.53KB
• crank-med.im 44.03KB
• crank-normal-crank-normal.texture.txt 84 bytes
• crank-normal.tga 512.02KB
• crank.im 55.26KB
• crank.tga 512.04KB
• thumbnail.jpg 6.98KB