point rodding, 2x, NSWGR

point rodding, 2x, NSWGR

Guided metal rods joined lengthwise in runs of up to several hundred metres, as used by NSWGR to transfer the action of a remote lever to the switch rails of a point (turnout).
Multiple rods headed in the same direction were commonly clustered laterally through common guide locations. Adjacent rod guides interlocked together. In this case there are 2 rods in the run.
Use cranks <kuid:368725:20087>, <kuid:368725:20088> and <kuid:368725:20266> to branch 1 or 2 rods from the rodding run.

point rodding, 2x, NSWGR
• config.txt 2.87KB
• main1-lod0.im 165.71KB
• main1-lod1.im 119.16KB
• main1-lod2.im 75.70KB
• main1-lod3.im 5.50KB
• main2-lod0.im 162.79KB
• main2-lod1.im 116.32KB
• rodding-rodding.texture.txt 49 bytes
• rodding.tga 512.04KB
• rodding_normal-rodding_normal.texture.txt 88 bytes
• rodding_normal.tga 512.02KB
• thumbnail.jpg 5.48KB

VE189: Collision data exceeds 64KB and has been simplified. Consider using a different generation method or a simplified mesh.