Set Selected Signal State

Set Selected Signal State

Set user-selected signal to the desired state. Signal remains in that state until changed back to automatic by using this command.
When control of the next signal ahead in the path of the controlling train is required, use sibling command Set Signal Ahead KUID:368725:60003.
Dedicated distant signals are not controlled.
Instances of signals to be controlled MUST be given localised names using Edit Properties in Surveyor.
Prior versions of this command allowed the user to select the target signal and the wanted signal state within one presentation of the menu.
Now there are 2 presentations of the menu required: the first to select the target signal and the second to select the wanted state of the target signal.
Only the selection of the wanted state results in the command being added to a schedule. Selection of the target signal is a preparatory step that does not require a scheduled command.
If the user is adding to a schedule or schedules a sequence of instances of this command for the same target signal, then selection of the target signal may be bypassed for all but the first addition in the sequence.
The identity of the current target signal is given at the bottom of each menu presentation.

Author: Trevor Laughton (trev999) and Leigh Stokes (ElStoko)

Set Selected Signal State
• banner.jpg 33.74KB
• config.txt 3.79KB
• icon.tga 64.04KB
• setextsignalstatecommand.gs 8.17KB
• setextsignalstateschedulecommand.gs 6.45KB

VE61: Required tag 'properties-behavior' was missing and has been set to default.