Set Selected Signal State v5

Set Selected Signal State v5

Set user-selected signal to the desired state. Signal remains in that state until changed back to automatic by using this command.
When control of the next signal ahead in the path of the controlling train is required, use sibling command Set Signal Ahead KUID:368725:60003.
Dedicated distant signals are not controlled.
Instances of signals to be controlled MUST be given localised names using Edit Properties in Surveyor.

Author: Trevor Laughton (trev999) and Leigh Stokes (ElStoko)

Set Selected Signal State v5
• banner.jpg 33.74KB
• config.txt 3.15KB
• icon.texture.txt 43 bytes
• icon.tga 64.04KB
• setextsignalstatecommand.gs 7.19KB
• setextsignalstateschedulecommand.gs 6.22KB

This item supplied by rail-sim for use within Trainz 2010 and later versions. No warranty is given nor any liability accepted for any damage which may be caused by the use of this item. No re-distribution, re-skinning, or modification is allowed without the prior permission of rail-sim.

VE48: This asset uses an obsolete trainz-build number. Trainz-build numbers below 3.5 are no longer supported.