NSWGR 2-arm semaphore shunt signal, SetB ShA, lower quadrant, op detect, 19ft post mount

NSWGR 2-arm semaphore shunt signal, SetB ShA, lower quadrant, op detect, 19ft post mount

A lower-quadrant, manually-operated, semaphore signal with 2 vertically-aligned arms mounted on a 19ft post.
The semaphore arms from top to bottom are: 1) Set Back straight ahead against the normal direction of the track; 2) Shunt Ahead, diverging right onto track with same direction as the shunt movement.
Each semaphore has a rod linkage to an operating-detection relay switch mounted underneath it. This was used to toggle a lamp mounted in line with the signal-box lever which operated the respective semaphore. Such detection circuits were used when sighting a signal from the signal box was not possible.
For correct automatic operation the signal must be used with directional feathers to uniquely identify the 2 possible paths indicated by each semaphore. Use <kuid2:60850:23901:4> 'Sig T Feather Straight' to mark the path of the upper semaphore; and <kuid2:60850:23921:4> 'Sig T Feather Right 1 (pos 4)' to mark the path of the lower semaphore.

NSWGR 2-arm semaphore shunt signal, SetB ShA, lower quadrant, op detect, 19ft post mount
• arm_l.im 115.52KB
• arm_l.kin 6.02KB
• arm_l.lm.txt 178 bytes
• arm_l_med.im 37.32KB
• arm_m.im 122.51KB
• arm_m.kin 6.02KB
• arm_m.lm.txt 178 bytes
• arm_m_med.im 39.50KB
• config.txt 4.09KB
• corona_green.texture.txt 35 bytes
• corona_green.tga 16.04KB
• corona_red.texture.txt 33 bytes
• corona_red.tga 16.04KB
• corona_white.texture.txt 35 bytes
• corona_white.tga 16.04KB
• main_0.im 206.41KB
• main_1.im 130.89KB
• main_2.im 72.09KB
• main_3.im 40.63KB
• shunt_semaphore-shunt_semaphore.texture.txt 65 bytes
• shunt_semaphore.tga 4.00MB
• shunt_semaphore_normal-shunt_semaphore_normal.texture.txt 104 bytes
• shunt_semaphore_normal.tga 4.00MB
• thumbnail.jpg 28.47KB
• vsrsemaphoresignal_202009.gs 28.12KB