Miniature Electric Staff Instrument, TGR

Miniature Electric Staff Instrument, TGR

A McKenzie & Holland miniature electric staff instrument as used by Tasmanian Government Railways (TGR).
The model is interactive and is intended to be operated by a 'Safeworking Officer',<kuid2:368725:15000:5>, using the 'SWO Controller Rule',<kuid2:96148:94051:16>.
This model is the main unit of a 2-unit instrument. It must be co-located with the associated asset 'Miniature Electric Staff Instrument, Bell Unit, TGR' <kuid:368725:90024>.
An instrument can only accept staffs of one pattern. No adjacent staff section uses the same pattern. The model allows the user to select the pattern handled for each instance of it on the map. Open 'Edit Properties' in Surveyor and toggle the control to set the pattern.
For correct operation there must be an instrument (main plus bell units) that accepts the same staff pattern at each end of the staff section. These instruments MUST use a naming convention. A 3-character location code is allocated to each location. If 'ABC' is the code at one end and 'DEF' is the code at the other end, then the A-end instrument is given the local name 'ABC_MSI_DEF' and the B-end instrument is given 'DEF_MSI_ABC'.
The associated bell units must also conform to the naming convention. The bell unit associated with main unit '<local location code>_MSI_<remote location code>' must be named '<local location code>_MSB_<remote location code>'.
The local safe-working officer must be named '<local location code> SWO'.

Miniature Electric Staff Instrument, TGR
• animatedstaff.im 12.04KB
• animatedstaff.kin 10.91KB
• circuitbreaker.im 34.04KB
• circuitbreaker.kin 10.77KB
• config.txt 14.15KB
• handset.im 62.52KB
• handset.kin 1.83KB
images
1_bell_pos_0.jpg 805 bytes
1_bell_pos_1.jpg 863 bytes
2_bell_pos_0.jpg 846 bytes
2_bell_pos_1.jpg 898 bytes
3_bell_pos_0.jpg 867 bytes
3_bell_pos_1.jpg 915 bytes
4_bell_pos_0.jpg 832 bytes
4_bell_pos_1.jpg 887 bytes
cb_pos_0.jpg 918 bytes
cb_pos_1.jpg 967 bytes
cb_pos_2.jpg 922 bytes
close.jpg 844 bytes
line_current_pos_0.jpg 741 bytes
line_current_pos_1.jpg 839 bytes
mes_in_pos_0.jpg 846 bytes
mes_in_pos_1.jpg 835 bytes
mes_out_pos_0.jpg 910 bytes
mes_out_pos_1.jpg 899 bytes
phone_pos_0.jpg 681 bytes
phone_pos_1.jpg 789 bytes
phone_pos_2.jpg 867 bytes
reject_train_pos_0.jpg 768 bytes
reject_train_pos_1.jpg 870 bytes
reject_train_pos_2.jpg 1,009 bytes
• main.im 75.84KB
• mesi_5.texture.txt 29 bytes
• mesi_5.tga 4.00MB
• mesi_5_normal.texture.txt 61 bytes
• mesi_5_normal.tga 4.00MB
• mesi_v16.gs 68.35KB
• needle1.im 722 bytes
• needle1.kin 1.83KB
• needle2.im 710 bytes
• needle2.kin 1.83KB
sounds
cb_switch.wav 38.33KB
extract_staff.wav 39.02KB
insert_staff.wav 110.21KB
pass_lock_in.wav 63.28KB
pass_lock_out.wav 42.80KB
staff_hits_pile.wav 77.56KB
staff_thru_throat.wav 94.30KB
• staff.im 8.94KB
• thumbnail.jpg 52.72KB