NSWGR mechanical lever frame for a station yard, 1-8 levers, for avatar operation

NSWGR mechanical lever frame for a station yard, 1-8 levers, for avatar operation

A group of levers that control points and signals mechanically via rodding and wires. The lever design is based on those in ground frames in use by New South Wales Government Railways in the 20th century.
The Edit Properties browser allows the user to select the type of each lever. Lever types include 'not in use'(white), 'home signal'(red), 'distant signal'(yellow), 'point'(black), 'facing point lock'(blue) and 'levers lock'(blue).
The lever is normally operated by a signalman or safe-working officer (SWO) avatar (see the 'SWO Controller Rule' <kuid:368725:60021>). When the relevant avatar is active in the yard in which this lever frame is placed, AI drivers cannot control the signals and points operated from the frame.
A naming convention must be followed to associate the frame and the location supervised by the avatar. If the avatar is named '<location code>_<sequence>' then the frame is named '<location code>_FRA_<frameID>'.
An example of a valid localised name of this asset is 'HR_FRA_B', where the asset instance is the 2nd mechanical lever frame or electrical switch console at location 'HR'.

NSWGR mechanical lever frame for a station yard, 1-8 levers, for avatar operation
• attach_pts.im 1.39KB
• config.txt 22.12KB
• frame lever normal-frame lever normal.texture.txt 96 bytes
• frame lever normal.tga 2.00MB
• frame lever white.texture.txt 40 bytes
• frame lever white.tga 2.00MB
images
close.jpg 844 bytes
help.jpg 1.17KB
ky_en_dummy.jpg 287 bytes
ky_en_pos_0.jpg 523 bytes
ky_en_pos_1.jpg 561 bytes
ky_in_pos_0.jpg 1.11KB
ky_in_pos_1.jpg 1.14KB
ky_out_pos_0.jpg 1.15KB
ky_out_pos_1.jpg 1.19KB
ld_0.jpg 810 bytes
ld_1.jpg 822 bytes
ll_0.jpg 819 bytes
ll_1.jpg 844 bytes
lp_0.jpg 768 bytes
lp_1.jpg 804 bytes
ls_0.jpg 797 bytes
ls_1.jpg 814 bytes
lu_0.jpg 832 bytes
lu_1.jpg 832 bytes
• lever.im 158.82KB
• lever.kin 18.66KB
• lever.lm.txt 230 bytes
• lever_low.im 72.49KB
• lever_med.im 122.35KB
• lever_termination_left.lm.txt 263 bytes
• num_1.im 3.71KB
• num_2.im 5.84KB
• num_3.im 8.60KB
• num_4.im 3.61KB
• num_5.im 7.09KB
• num_6.im 12.73KB
• num_7.im 2.35KB
• num_8.im 12.25KB
• platform_4.im 10.46KB
• platform_8.im 10.46KB
• rod_pull.im 16.60KB
• rod_push.im 16.60KB
• termination_left.im 168.70KB
• termination_left_low.im 79.22KB
• termination_left_med.im 128.64KB
• termination_right.im 67.62KB
• termination_right_low.im 27.28KB
• termination_right_med.im 51.30KB
• thumbnail.jpg 18.37KB
• yardframe_1-10 v26.gs 177.66KB