Layout-Stretch Oval in TRS 19

Layout-Stretch Oval in TRS 19

The route has 3 trains:
1. cargo
2. Inter City - (passengers)
3. Inter Regio (passengers)
There is space reserved for another 3-4 locomotives.
Any of the trains can be driven manually or via command sets.
The commands are:
1. for the order of coupling the locomotives to their wagons
3. for departure on the race (transport of goods and passengers), countable number of races up to 300
Note: The steam locomotive has 3 starting options:
1. sand, coal and water supply and return to the yard
2. supply with sand, coal and water and coupling to freight wagons
3. coupling to goods wagons, without power supply
Because I don't know of any way to block access to the turntable when there is a locomotive on it, the order of coupling the locomotives, in case the simultaneous start of the actions is desired, is delayed by 2 minutes for each departure:
1 goes first
2. the second leaves in 2 min. of the first
3. the third leaves in 2 min. of the second
The order of departures was successfully tested for all 6 possible variants (steam locomotive departing on coupling after refueling)
To leave in order:
1. Inter Region
2. Steam locomotive
3. Inter City
in an interval of 1 hour were counted:
1. 5 complete races for Inter Regio
2. 3 complete runs for the freight train
3. 4 full runs for Inter City.
There were no problems
I have successfully tested the departure option in the following order:
1. Inter Region
2. Steam locomotive (without power)
3. Inter City

Anyone who wants can modify anything in the route and/or scenario

Layout-Stretch Oval in TRS 19
• _temp_mapfile.bmk 330 bytes
• config.txt 23.91KB
• mapfile.amd 3.36KB
• mapfile.bmk 330 bytes
• mapfile.gnd 1.19KB
• mapfile.lyr 27 bytes
• mapfile.map 72.13KB
• mapfile.not 3.73KB
• mapfile.trc 32 bytes
• mapfile_0_-1.vtx 28 bytes
• mapfile_0_0.obs 28 bytes
• mapfile_0_0.rlr 81 bytes
• mapfile_0_0.trk 28 bytes
• mapfile_0_0.vtx 28 bytes
• mapfile_0_1.obs 28 bytes
• mapfile_0_1.trk 28 bytes
• mapfile_0_1.vtx 28 bytes
• mapfile_1_-1.gnd 33.33KB
• mapfile_1_-1.obs 10.52KB
• mapfile_1_-1.trk 8.49KB
• mapfile_1_-1.vtx 10.38KB
• mapfile_1_-2.vtx 28 bytes
• mapfile_1_0.gnd 36.27KB
• mapfile_1_0.obs 15.25KB
• mapfile_1_0.trk 10.08KB
• mapfile_1_0.vtx 10.74KB
• mapfile_2_-1.gnd 20.65KB
• mapfile_2_-1.obs 45.61KB
• mapfile_2_-1.trk 34.02KB
• mapfile_2_-1.vtx 36.72KB
• mapfile_2_0.obs 28 bytes
• mapfile_2_0.trk 28 bytes
• mapfile_2_0.vtx 28 bytes
• mapfile_3_-1.obs 28 bytes
• mapfile_3_-1.trk 28 bytes
• mapfile_3_-1.vtx 28 bytes
• mapfile_index.obs 639 bytes
• mapfile_index.rlr 25 bytes
• mapfile_index.trk 231 bytes
• mapfile_index.vtx 127 bytes
• thumbnail.jpg 209.88KB