VR J Class E-spec - 2 (TS09)

VR J Class E-spec - 2 (TS09)

Victorian Railways J Class was built to replace the aging D3 and K Class locomotives from 1952/53, this physic is set up for the Coal Burning J Class after the Boiler Pressure was increased by 5 Pounds per Square Inch.

Locomotive Data.

Boiler Type: Superheated
Boiler Tubes: 124 at 2 inches diameter
Boiler Flues: 21 at 5 inches diameter
Superheater Elements: 21 at 1 3/8 inches diameter
Boiler Volume: 4,781 Litres
Firebox: 127.00 sq ft
Tubes & Flues: 1317.00 sq ft
Elements: 238.00 sq ft
Grate Area 31.00 sq ft
Boiler Press: 180 PSI
Safety Valve Low: 180 PSI
Safety Valve High: 183 PSI
Bore x Stroke: 20in x 26in
Driving Wheels: 4ft 7in
Tractive Power: 29,460lbs '85% MEP WP'
Top Speed: 50mph
Main Res: (2x) 13.55cu ft, 100 PSI Max
Brake Pipe: 72 PSI Max
Brake Cylinder: (1x) 15in x 6.25in, 50 PSI Max

Author: -

VR J Class E-spec - 2 (TS09)
• config.txt 7.04KB
• data.txt 1.75KB

VE48: This asset uses an obsolete trainz-build number. Trainz-build numbers below 3.5 are no longer supported.
VE61: Required tag 'throttle-notches' was missing and has been set to default.
VE61: Required tag 'hand-brake-max-force' was missing and has been set to default.
VE62: Required container 'thumbnails' is missing.