NSW OCX T1aB 1969+

NSW OCX T1aB 1969+

The New South Wales OCX were built between 1969 and 1971 by Tulloch Ltd, A total of 90 wagons were built. They were very similar to the Victorian Railways and South Australian Railways FQX. The steel decked wagons are fitted to carry three 20ft ISO Containers or one 40ft and one 20ft container, or two 20ft containers placed each end with the doors facing in so they can be loaded/unloaded with a forklift without the need to take the containers off the wagon. During the late 1970's some would be seen on the Broad Gauge in Victoria and South Australia on Jets.

This model represents the OCX built from 1969 in SRA Blue and numbered 14551 to 14640 on Broad Gauge Step's created by Zec.

Mass: 20 tons (empty) 83 tons (loaded)
Load Capacity: 62 tons, Two Loaded or Three Empty
Max Speed: 60mph
Axle Load: 20 tons
Brake Cylinder: (1) 12in x 12in Air slack Adjuster
Brake Ratio: 33.8% (Loaded) ~ 72.0% (Empty) Load Compensating

Author: Azervich

NSW OCX T1aB 1969+
shadow
shadows.im 31.42KB
• screenshot.jpg 16.02KB
• wagon.gs 31.33KB
• mass to kg.txt 357 bytes
• icon.tga 6.04KB
wagon_alpha_numbers
alphanumber_1.texture.txt 63 bytes
alphanumber_0.tga 16.04KB
alphanumber_2.texture.txt 63 bytes
alphanumber_1.tga 16.04KB
alphanumber_3.texture.txt 63 bytes
alphanumber_4.texture.txt 63 bytes
alphanumber_3.tga 16.04KB
alphanumber_0.texture.txt 63 bytes
alphanumber_2.tga 16.04KB
alphanumber_5.texture.txt 63 bytes
alphanumber_4.tga 16.04KB
alphanumber_6.texture.txt 63 bytes
alphanumber_7.texture.txt 63 bytes
alphanumber_5.tga 16.04KB
alphanumber_8.tga 16.04KB
alphanumber_9.texture.txt 63 bytes
alphanumber_8.texture.txt 63 bytes
alphanumber_7.tga 16.04KB
alphanumber_6.tga 16.04KB
alphanumber_9.tga 16.04KB
wagon_body
bolsters-bolsters-env.texture.txt 57 bytes
bolsters-normals.texture.txt 91 bytes
bolsters.lm.txt 185 bytes
bracket-20ft-back.lm.txt 194 bytes
bolsters.im 8.70KB
bracket-20ft-center.im 24.49KB
bracket-20ft-center.lm.txt 196 bytes
bracket-40ft-back.lm.txt 194 bytes
bracket-20ft-front.lm.txt 195 bytes
bracket-40ft-front.lm.txt 195 bytes
bracket-20ft-back.im 22.32KB
bolsters-normals.tga 192.04KB
bracket-40ft-front.im 24.49KB
digit_3.texture.txt 32 bytes
bracket-20ft-front.im 21.80KB
bracket-40ft-back.im 24.49KB
digit_2.texture.txt 32 bytes
digit_4.texture.txt 32 bytes
bolsters-spec.tga 192.04KB
digit_2.tga 48.04KB
digit_5.texture.txt 32 bytes
digit_6.texture.txt 32 bytes
digit_3.tga 48.04KB
digit_4.tga 48.04KB
grade-control-lever.kin 2.32KB
grade-control-lever.im 17.04KB
groundplane.texture.txt 59 bytes
digit_5.tga 48.04KB
digit_6.tga 48.04KB
groundplane.tga 128.04KB
handbrake.kin 10.52KB
load-compensating-lever.kin 4.96KB
main-main-env.texture.txt 49 bytes
load-compensating-lever.im 20.52KB
handbrake.im 48.97KB
main-normals.texture.txt 83 bytes
bolsters-env.tga 192.04KB
bolsters.tga 192.04KB
mesh-step-mesh-step-env.texture.txt 59 bytes
mesh-step-normals.texture.txt 93 bytes
mesh-step-alpha.tga 192.04KB
mesh-step-env.tga 192.04KB
mesh-tris.im 378 bytes
stanchion-in.lm.txt 189 bytes
stanchion-in.im 14.63KB
stanchion-mid.lm.txt 190 bytes
stanchion-mid.im 14.63KB
stanchion-out.im 19.59KB
stanchion-out.lm.txt 190 bytes
stanchion-side.im 19.59KB
stanchion-side.lm.txt 191 bytes
wagon.lm.txt 147 bytes
mesh-step-normals.tga 192.04KB
mesh-step.tga 192.04KB
wagon_low.im 401.70KB
mesh-step-spec.tga 192.04KB
wagon_highest.im 1.49MB
main.tga 12.00MB
main-normals.tga 12.00MB
main-spec.tga 12.00MB
main-env.tga 12.00MB