1960s 4 Axle Wagon E-spec - 1 - (TS09)

1960s 4 Axle Wagon E-spec - 1 - (TS09)

Victorian Railways Physic for Roller Bearing Wagon Stock Cars.

Used on Wagons built from 1960s to replace older 4 wheel Wagons and to be able to carry large amounts of bulk loads such as Wheat, Rice, Oats, Sugar (2 Axle Roller Bearing Bogie's).

Also best on 17-21ton Cars Unloaded Tare Weight and upto 75tons loaded, anything lighter or heavier makes it handle different the physic has been set up with Grade Control so the brake cylinders vent at a very slow rate, the brake ratio is also based on Load Compensating System which means the values are set for a fully loaded wagon's max braking effort, only issue is unloaded wagons will brake too hard, The Load Compensating Lever reduces the max brake cylinder pressure to 27PSI for unloaded wagons while loaded wagons get the full 50 PSI pressure, hopefully one day N3V puts a brake cylinder efficiency tag in the scripts so we can control it for loaded or unloaded wagons.

Brake Pipe: 72PSI Max
Brake Cylinders: (2x) 12in x 12in 50 PSI Max
Brake Ratio: 33.5% - 83.2%

1960s 4 Axle Wagon E-spec - 1 - (TS09)
• config.txt 5.17KB
• screenshot.jpg 54.82KB

VE48: This asset uses an obsolete trainz-build number. Trainz-build numbers below 3.5 are no longer supported.