VR Y T1a 1904+

VR Y T1a 1904+

Victorian Railways Y Class 0-6-0 Standard Locomotives comprised a group of 31 engines destined for mainline goods traffic. These were of impressive size for it's day, in fact no bigger 0-6-0 was ever built for an Australian railway. The initial pattern engine (# 445), named ' Victoria' was built to their own design by Kitson & Co Leeds Engineering England in 1887 and carried builder's number 3089. The remainder were built at Ballarat by the Phoenix Foundry and given road numbers, in odd notation, 383 to 441 (builder's no. 220 - 249). The early activities of the class were generally restricted to mainline goods traffic, as the high axle loading precluded their use on the light lines which were generally laid with 60lb rails. These locomotives were fitted with two inside cylinders, 18in x 26in, the slide valves being actuated by Stephenson's valve gear. Each of the six coupled driving wheels measured 4ft 6in, with the axles equally spaced at 7ft 6in centres. Cast-iron sandboxes were mounted on the running plates adjacent to the smokebox and incorporated the leading splashers.

Boilers were frequently interchanged with the 'New A' class 4-4-0's and had a total heating surface of 1151.00 sq ft, of which the tubes contributed 1056.00 sq ft. The firebox of 95.00 sq ft had a fire grate area of 21.0 sq ft. The working boiler pressure was 140lbs, which gave a tractive effort of 17,472lbs. The 6 wheel tender which was standard on the 'New A', 'New R' and 'D' classes carried 10,001 litres of water and 3.556 tons of coal.

In 1890 they were allocated as follows: Melbourne (22), Ballarat (8) and Bendigo (1). The Engines allocated to Ballarat also run heavy goods to Ararat, Geelong and Colac via Cressy, some where used as Bankers for the Long 1in52 Warrenheip Bank towards Geelong and Bacchus Marsh for the Long 1in48 Ingliston Bank towards Ballarat.

Numbers 387, 413 and 445 was used on contruction trains from 1889 to 1900

Troughout the years the class was used in many experiments, No.389 was fitted with a Knorr's feed water heater 1895~97, No.409 was fitted for Oil Burning 1904~1905, No.433 fitted with a Norwegian spark arrester 1895~96.

Some of the class where also involved in accidents, 413 ran into track laying equipment building the Outer Circle in 1889, 385 Derailed at North Geelong in 1895 and again with a collision into a ballast train at Fairfield 1900, 383 had a collision at Somerton 1890, 387 damaged in accident 1892, 395 in ballast train accident Fairfield 1900, .

This model represents the early locomotives before they where all re-boilered, re-boilering started from 1904 through to 1909 and where painted Canadian Red from 1903, this model contains number ranges that was not re-boilered after 1907.

Locomotive Data:

Load Table: 100%
Mass: (empty) 37-11-0-0 (loaded) 40-10-0-0
Coupled Mass: (empty) 51-11-0-0 (loaded) 70-9-0-0
Axle Load: 14-7-0-0
Max Speed: 45mph (Tender First) 28mph
Wheel Base: 15ft 0in (total) 35ft 8.5in
Minimal Weight Rail: 70lbs/y

Author: Azervich

VR Y T1a 1904+
• blower.tfx 404 bytes
• blower.wav 278.82KB
• compressor-chuff-1.wav 60.04KB
• compressor-chuff-2.wav 60.04KB
• config.txt 35.99KB
• icon.tga 6.04KB
loco_body
alpha-alpha.texture.txt 47 bytes
alpha.tga 32.04KB
body_highest.im 1.48MB
body_low.im 487.62KB
body_lowest.im 7.74KB
body_mid.im 1.09MB
compressor.im 1.47KB
compressor.kin 5.95KB
compressor.lm.txt 140 bytes
groundplane-groundplane.texture.txt 70 bytes
groundplane.tga 128.04KB
main-env.tga 12.00MB
main-main-env.texture.txt 49 bytes
main-normals.texture.txt 83 bytes
main-normals.tga 12.00MB
main-spec.tga 12.00MB
main.tga 12.00MB
night-lamps.im 836 bytes
night-lamps.lm.txt 141 bytes
numbers.texture.txt 32 bytes
numbers.tga 768.04KB
windows.texture.txt 62 bytes
windows.tga 1.00MB
yclass.lm.txt 287 bytes
• safetyvalves-large.tfx 420 bytes
• safetyvalves-small.tfx 420 bytes
• screenshot.jpg 51.76KB
shadow
shadow.im 81.55KB
shadow.lm.txt 136 bytes
• small-gland.tfx 404 bytes
• whistle.tfx 428 bytes
• y_class.gs 36.04KB

Victrainz Standard License.