VR R3 t1c 1924+

VR R3 t1c 1924+

Victorian Railways R Class 0-6-0 Light Lines Locomotives comprised a group of 25 engines destined for branchline goods traffic. The class were built by Robison's Bros South Melbourne and given road numbers and where, in odd notation, 447 to 495 (builder's no. 9 - 33) and where called 'Kitson's Design' to distinguish them from the Beyer Peacock Design which later became 'Old' R Class. In 1893 the class was re-looked at from it's design and the activities of the class became restricted to mainline goods traffic as the high axle loading of 13tons and 17cwt precluded their use on the light lines which they were intended for. These locomotives were fitted with two inside cylinders, 17in x 26in, the slide valves being actuated by Stephenson's valve gear. Each of the six coupled driving wheels measured 4ft 6in, the boiler had a total heating surface of 1054.00 sq ft, of which the tubes contributed 971.00 sq ft. The firebox of 83.00 sq ft had a fire grate area of 17.8 sq ft. The working boiler pressure was 140lbs, which gave a tractive effort of 15,585lbs, with the axles oddly spaced at 7ft 8in and 6ft 9in. Cast-iron sandboxes were mounted on the running plates adjacent to the smokebox and incorporated the leading splashers.

The 'New' R class was built to be a Light Lines Goods Engine which looks the same as the main Line goods Engine Y Class but was 10 inches shorter and the wheels spaced oddly being 7ft 8in and 6ft 9in. The 6 wheel tender which was standard on the 'New A', 'Y' and 'D' classes carried 10,001 litres of water and 5 tons of coal.


This model represents RY 491, 493 and 495 converted to Y Class and renumbered 418, 420 and 422 from 1924 to 1930, all 3 where allocated to Melbourne Yard, number 418 was withdrawn 19/10/1929 and number 422 was withdrawn 18/02/1927.


Locomotive Data:

Load Table: 113%
Mass: (empty) 37ton 11cwt (loaded) 42ton 8cwt
Coupled Mass: (empty) 52ton 18cwt (loaded) 72ton 11cwt
Axle Load: 15ton 2cwt
Max Speed: 40mph (Tender First) 28mph
Wheelbase: 14ft 5in (total) 35ft 0in
Minimal Weight Rail: 70lbs/y

VR R3 t1c 1924+
• air-brake-application-hiss-loop.wav 150.12KB
• air-brake-release-hiss-loop.wav 105.17KB
• blower.tfx 404 bytes
• blower.wav 278.82KB
body
alpha.texture.txt 45 bytes
alpha.tga 128.04KB
body_highest.im 1.86MB
body_low.im 586.40KB
body_lowest.im 7.63KB
body_mid.im 1.28MB
compressor.im 2.04KB
compressor.kin 5.95KB
compressor.lm.txt 140 bytes
main-env.tga 12.00MB
main-main-env.texture.txt 49 bytes
main-normals.texture.txt 83 bytes
main-normals.tga 12.00MB
main-spec.tga 12.00MB
main.tga 12.00MB
night-lamps.im 836 bytes
night-lamps.lm.txt 145 bytes
numbers.texture.txt 32 bytes
numbers.tga 768.04KB
rclass.lm.txt 287 bytes
windows.texture.txt 51 bytes
windows.tga 1.00MB
• brake-squeel-loop.wav 380.71KB
• compressor-chuff-1.wav 60.04KB
• compressor-chuff-2.wav 60.04KB
• compressor-chuff-fast-1.wav 56.22KB
• compressor-chuff-fast-2.wav 55.83KB
• compressor-chuff-slow-1.wav 65.19KB
• compressor-chuff-slow-2.wav 64.89KB
• config.txt 37.31KB
• icon.tga 6.04KB
• injectorloop.wav 165.75KB
• ry_class.gs 62.78KB
• safetyvalves-large.tfx 420 bytes
• safetyvalves-small.tfx 420 bytes
• screenshot.jpg 49.33KB
• small-gland.tfx 404 bytes
• snifter-valves-big.tfx 404 bytes
• snifter-valves.tfx 404 bytes
• wheel-grind-loop.wav 371.75KB
• wheel-grind-squeal-loop.wav 371.65KB
• whistle.tfx 428 bytes