VR EE T2a 1907+

VR EE T2a 1907+

During the mid 1880s the Victorian Railways was in need for a more powerful Suburban Locomotive and in 1887 Kitson and Co of Leeds Engineering England built a 2-4-2 Tank and exhibited at Melbourne 1888 which was bought by the Victorian Railways afterwards and numbered 426.

In 1889 Phoenix Foundry Ballarat and David Munro & Co built a total of 70 engines and all entered service from 1889 to 1894, during 1893 the Phoenix Foundry thought of modifying the design into a 0-6-2 Tank for Suburban Goods and Shunting purpose, a total of 5 engines was built and classed 'EE'. In 1896 David Munro & Co converted two E Class 2-4-2's into EE 0-6-2's which looked sligtly different to the original Phoenix design as they where built without shunter's steps and larger sand boxes, another two where converted in 1906/07.

This model represents numbers 478, 482, 490 and 496 built by David Munro & Co painted to the Newer Canadian Red introduced from 1903, these locomotives didn't get reboilered till 1923 onwards with the 160 and 170 PSI Boilers while the last didn't get reboilered till 1934 and most of them where fitted with 18in diameter cylinders, From 1923 some where renumbered to the new block numbering system and reclassed to E, 478 became 361, 482 became 363, 490 became 367 and 496 became 371. E 371 is currently preserved at Maldon on a Plinth for Static Display.

These locomotives where in service till mid 1970s, only two servived preservation, numbers 369 and 371, they are in very bad shape and will never be restored to running condition.

Locomotive Data:

Load Table: 80%
Mass: (empty) 39-4-0-0 (loaded) 51-1-0-0
Coal: 50cwt
Water: 1600 imp gals
Axle Load: 15-1-0-0
Max Speed: 40mph
Wheel Base: 20ft 7in
Minimal Weight Rail: 66lbs/y

Author: azervich

VR EE T2a 1907+
• blower.tfx 404 bytes
• blower.wav 278.82KB
body
alpha-alpha.texture.txt 58 bytes
alpha.tga 128.04KB
body.lm.txt 288 bytes
body_highest.im 1.65MB
body_low.im 285.59KB
body_lowest.im 8.99KB
body_mid.im 1.26MB
coal-door.im 12.38KB
coal-door.kin 3.20KB
coal-door.lm.txt 140 bytes
coal-normals.texture.txt 81 bytes
coal-normals.tga 192.04KB
coal.im 4.16KB
coal.kin 5.17KB
coal.lm.txt 135 bytes
coal.texture.txt 27 bytes
coal.tga 64.77KB
compressor.im 1.47KB
compressor.kin 5.95KB
compressor.lm.txt 141 bytes
groundplane - copy.tga 128.53KB
groundplane-groundplane.texture.txt 70 bytes
groundplane.tga 128.04KB
left-filler.im 4.97KB
left-filler.lm.txt 142 bytes
main-env.tga 12.00MB
main-main-env.texture.txt 49 bytes
main-normals.texture.txt 83 bytes
main-normals.tga 12.00MB
main-spec.tga 12.00MB
main.tga 12.00MB
night-lamps.im 716 bytes
night-lamps.lm.txt 142 bytes
numbers.texture.txt 32 bytes
numbers.tga 768.04KB
right-filler.im 4.97KB
right-filler.lm.txt 143 bytes
water-normals.texture.txt 82 bytes
water-normals.tga 48.04KB
water.im 964 bytes
water.kin 3.75KB
water.lm.txt 136 bytes
water.texture.txt 28 bytes
water.tga 48.04KB
windows.texture.txt 62 bytes
windows.tga 1.00MB
• compressor-chuff-1.wav 60.04KB
• compressor-chuff-2.wav 60.04KB
• compressor-slow.wav 258.65KB
• config.txt 41.46KB
• ee_class.gs 38.55KB
• icon.tga 6.04KB
• safetyvalves-large.tfx 420 bytes
• safetyvalves-small.tfx 420 bytes
• screenshot.jpg 50.92KB
shadow
shadow.im 119.85KB
shadow.lm.txt 137 bytes
• small-gland.tfx 404 bytes
• snifter-valves-big.tfx 404 bytes
• snifter-valves.tfx 404 bytes
• whistle.tfx 428 bytes

Victrainz Standard License.