VR FQX t1a 1973+

<kuid:404079:3941>

Author: Azervich
Kind: traincar
Build: 4.2
Size: 9.75MB
Uploaded: 2025-11-22
Website: http;//victrainz.com.au/forum
Downloads:
1
-
0
+

VR FQX t1a 1973+

From 1969 the South Australian Railways, Victorian Railways and New South Wales Railways started construction on what was to be a standard container wagon to be bogie exchanged for broad and standard gauges for running between the states capital cities and to shipping ports such as Adelaide-Melbourne (BG), Adelaide-Perth (SG), Adelaide-Sydney (SG), Melbourne-Sydney (SG), Sydney-Perth via Port Pirie (SG), Sydney-Brisbane (SG). The South Australian Railways and the Victorian Railways coded their wagons FQX with South Australia being allocated numbers 1 to 500 however SAR only built 120 while Victoria took numbers 501 onwards and built upto 510 of them by 1980, New South Wales coded theirs OCX and built 90 taking numbers 14551 to 14640, from 1973 NSW started building OCY container wagons for Standard Gauge only traffic taking numbers 14901 to 15000 which where similar to the OCX with 100 built, this was extended to another 370 new OCY wagons built taking numbers 34301 to 35050 and numbers 150001 to 150070 having a total of 560 built by 1975, containers where loaded and unloaded at country towns by having a flat wagon on the end with some ramps for the forklifts without the need to left the containers and place them on the ground. The load limit of 75 Tons (76 tonnes) and axle load of 18 Tons (19 tonnes) is due to country lines still having 60lb/y and 75lb/y rails along with weakened timber bridges, in Victoria some lines required a few KQ and KMQ wagons placed between the FQX to spread the gross weight going over weakened timber bridges such as Bairnsdale to Orbost line.


This model represents the FQX in a dirty wagon red from 1973 with metric weights on Broad Gauge, Step's created by Zec.


Mass: 19.4 tonnes (empty) 76 tonnes (loaded)
Load Capacity: 56 tonnes, Two Loaded or Three Empty
Max Speed: 96 km/h
Axle Load: 19 tonnes
Brake Cylinder: (1) 305mm x 305mm Air slack Adjuster
Brake Ratio: 33.8% (Loaded) ~ 72.0% (Empty) Load Compensating

Author: Azervich

    VR FQX t1a 1973+
  • config.txt 13.78KB
  • icon.tga 6.04KB
  • mass to kg.txt 357 bytes
  • screenshot.jpg 46.16KB
  • wagon
  • alpha.texture.txt 58 bytes
  • alpha.tga 128.04KB
  • bolsters-bolsters-env.texture.txt 57 bytes
  • bolsters-env.tga 192.04KB
  • bolsters-normals.texture.txt 91 bytes
  • bolsters-normals.tga 192.04KB
  • bolsters-spec.tga 192.04KB
  • bolsters.im 8.70KB
  • bolsters.lm.txt 185 bytes
  • bolsters.tga 192.04KB
  • bracket-20ft-back.im 22.32KB
  • bracket-20ft-back.lm.txt 194 bytes
  • bracket-20ft-center.im 24.66KB
  • bracket-20ft-center.lm.txt 196 bytes
  • bracket-20ft-front.im 21.98KB
  • bracket-20ft-front.lm.txt 195 bytes
  • bracket-40ft-front.im 24.23KB
  • bracket-40ft-front.lm.txt 195 bytes
  • digit_4.texture.txt 51 bytes
  • digit_4.tga 48.04KB
  • digit_5.texture.txt 51 bytes
  • digit_5.tga 48.04KB
  • digit_6.texture.txt 51 bytes
  • digit_6.tga 48.04KB
  • grade-control-lever-tris.im 506 bytes
  • grade-control-lever.im 17.04KB
  • grade-control-lever.kin 2.33KB
  • grade-control-lever.lm.txt 211 bytes
  • handbrake-tris.im 958 bytes
  • handbrake.im 52.74KB
  • handbrake.kin 10.53KB
  • handbrake.lm.txt 191 bytes
  • load-compensating-lever-tris.im 686 bytes
  • load-compensating-lever.im 20.52KB
  • load-compensating-lever.kin 4.97KB
  • load-compensating-lever.lm.txt 219 bytes
  • main-env.tga 12.00MB
  • main-main-env.texture.txt 49 bytes
  • main-normals.texture.txt 83 bytes
  • main-normals.tga 12.00MB
  • main-spec.tga 12.00MB
  • main.tga 12.00MB
  • mesh-step-alpha.tga 192.04KB
  • mesh-step-env.tga 192.04KB
  • mesh-step-mesh-step-env.texture.txt 59 bytes
  • mesh-step-normals.texture.txt 93 bytes
  • mesh-step-normals.tga 192.04KB
  • mesh-step-spec.tga 192.04KB
  • mesh-step.tga 192.04KB
  • mesh-tris.im 378 bytes
  • stanchion-in.im 14.63KB
  • stanchion-in.lm.txt 189 bytes
  • stanchion-mid.im 14.63KB
  • stanchion-mid.lm.txt 190 bytes
  • stanchion-out.im 19.59KB
  • stanchion-out.lm.txt 190 bytes
  • wagon.lm.txt 339 bytes
  • wagon_highest.im 1.43MB
  • wagon_low.im 344.55KB
  • wagon_lowest.im 2.05KB
  • wagon_mid.im 921.55KB
  • wagon_vlow.im 164.92KB
  • wagon.gs 25.79KB
  • wagon_alpha_numbers
  • alphanumber_0.texture.txt 63 bytes
  • alphanumber_0.tga 16.04KB
  • alphanumber_1.texture.txt 63 bytes
  • alphanumber_1.tga 16.04KB
  • alphanumber_2.texture.txt 63 bytes
  • alphanumber_2.tga 16.04KB
  • alphanumber_3.texture.txt 63 bytes
  • alphanumber_3.tga 16.04KB
  • alphanumber_4.texture.txt 63 bytes
  • alphanumber_4.tga 16.04KB
  • alphanumber_5.texture.txt 63 bytes
  • alphanumber_5.tga 16.04KB
  • alphanumber_6.texture.txt 63 bytes
  • alphanumber_6.tga 16.04KB
  • alphanumber_7.texture.txt 63 bytes
  • alphanumber_7.tga 16.04KB
  • alphanumber_8.texture.txt 63 bytes
  • alphanumber_8.tga 16.04KB
  • alphanumber_9.texture.txt 63 bytes
  • alphanumber_9.tga 16.04KB

User photos

No one has uploaded a photo of this object yet.