EMD 16-710 Engine Sound

EMD 16-710 Engine Sound

The EMD 710 is a line of diesel engines built by Electro-Motive Diesel (previously General Motors' Electro-Motive Division). The 710 series replaced the earlier EMD 645 series when the 645F series proved unreliable in the early 1980's 50-series locomotives. The EMD 710 is a large two-stroke diesel engine that has 710 cubic inches (11.6 liters) displacement per cylinder.[1] Since its introduction, EMD has continually upgraded the 710G diesel engine. Power output has increased from 3,800 horsepower (2,800 kW) on 1984's 16-710G3A to 4,500 horsepower (3,400 kW) (as of 2012) on the 16-710G3C-T2, but most current examples are 4,300 horsepower (3,200 kW).

Author: mutanay77

EMD 16-710 Engine Sound
• config.txt 2.53KB
• down 2 - 1.wav 685.36KB
• down 3 - 2.wav 766.96KB
• down 4 - 3.wav 685.43KB
• down 5 - 4.wav 618.32KB
• down 6 - 5.wav 564.15KB
• down 7 - 6.wav 514.72KB
• down 8 - 7.wav 761.48KB
• engine.jpg 18.56KB
• idle 1.wav 274.95KB
• idle 2.wav 815.86KB
• idle 3.wav 726.87KB
• idle 4.wav 647.58KB
• idle 5.wav 590.85KB
• idle 6.wav 539.08KB
• idle 7.wav 491.86KB
• idle 8.wav 757.49KB
• start.wav 1.63MB
• stop.wav 306.92KB
• up 1 - 2.wav 685.36KB
• up 2 - 3.wav 766.96KB
• up 3 - 4.wav 685.43KB
• up 4 - 5.wav 618.32KB
• up 5 - 6.wav 564.15KB
• up 6 - 7.wav 514.72KB
• up 7 - 8.wav 761.48KB

VE48: This asset uses an obsolete trainz-build number. Trainz-build numbers below 3.5 are no longer supported.