Bascule Lift Bridge 2

Bascule Lift Bridge 2

A single rail track Bascule Lift span bridge, 72 metres main span. This is based on the dual track bridge built by the American Bridge Company, and is unusual in its operation of the counterweight. The bridge was an attempt to patent something different without infringing existing patents.

It is a modified version of the Strauss Heel Trunnion type. One example existed on the Wabash (now N&W) outside Detroit. The bridge is in the up position until a train comes along, and is suitable for a river crossing. It dates from about 1940. It has been updated for TS2009 but is a TRS2004 model.

You will find it as Bascule Lift Bridge 2 in the USA listing.

The bridge is a mocrossing object and the height is adjusted by raising the ground beneath the centre of the span. Track will connect to the bridge, but you need to use very short lengths of track to connect other bridge splines to it - use invisible track. The bridge approaches for the Tenbridge lift bridge are a match for this structure.

Author: Ian Manion (Vulcan)

Bascule Lift Bridge 2
• anim.kin 36.39KB
• bascule.im 118.78KB
• checkrail.texture.txt 32 bytes
• checkrail.tga 6.53KB
• concrete2.texture.txt 32 bytes
• concrete2.tga 48.53KB
• config.txt 3.18KB
• door4.texture.txt 28 bytes
• door4.tga 24.53KB
• lattice-lattice.texture.txt 49 bytes
• lattice.bmp 12.05KB
• lattice.tga 12.53KB
• lightalpha.bmp 12.05KB
• lightblue-lightalpha.texture.txt 54 bytes
• lightblue.bmp 12.05KB
• lightblue.texture.txt 32 bytes
• lightblue.tga 12.53KB
• lightred-lightalpha.texture.txt 53 bytes
• lightred.bmp 12.05KB
• lightred.texture.txt 31 bytes
• lightred.tga 12.53KB
• lightyellow-lightalpha.texture.txt 56 bytes
• lightyellow.bmp 12.05KB
• lightyellow.texture.txt 34 bytes
• lightyellow.tga 12.53KB
• pier2.texture.txt 28 bytes
• pier2.tga 192.53KB
• preview.jpg 17.47KB
• rack.texture.txt 27 bytes
• rack.tga 12.53KB
• rail2.texture.txt 28 bytes
• rail2.tga 6.53KB
• railing7-railing7.texture.txt 51 bytes
• railing7.bmp 3.05KB
• railing7.tga 3.53KB
• roof4.texture.txt 28 bytes
• roof4.tga 12.53KB
• steelgrey1.texture.txt 33 bytes
• steelgrey1.tga 12.53KB
• steeltruss.texture.txt 33 bytes
• steeltruss.tga 12.53KB
• steeltruss2.texture.txt 34 bytes
• steeltruss2.tga 12.53KB
• ties-ties.texture.txt 55 bytes
• ties.bmp 48.05KB
• ties.tga 48.53KB
• timber.texture.txt 29 bytes
• timber.tga 48.53KB
• wall.texture.txt 27 bytes
• wall.tga 48.53KB
• window2-window2.texture.txt 49 bytes
• window2.bmp 24.05KB
• window2.tga 24.53KB

This file is released free of charge for you to use. You may not host on a webserver or redistribute the model without my permission, and if permitted, only as long as you do not do so for profit. This licence file must be included with any permitted redistribution. Copyright of the model and original textures remains with Ian Manion (Vulcan)