STL NGKoppel 3.11

STL NGKoppel 3.11

This mesh library contain animated meshes for the swedish narrow gauge companies
that operated on 891 and 1067 mm gauge rails. The meshes are functionally animated and scripted in the same way as STL Koppel for 1435 mm
rolling stock. The couplings and buffers are center mounted on the vehicles and are placed according to the STL NG Kopple Guide.

The following items are accessable from the vehicles config file:

koppel_up.im and .kin - horseshoe coupling with the opening facing upwards.
koppel_down.im and .kin - horseshoe coupling with the opening facing downwards.
koppel_1chain.im and .kin - horseshoe coupling with hooks locking the buffers, often called one chamber type.
luft_0_anim.im and .kin - air hose right
luft_1_anim.im and .kin - air hose left
luft_off.im ans luft_on.im are static meshes that can be used for certain circumstances.
A more modern so called two chamber type which is shorter is also implemented:

koppel_2chain.im and .kin - with chains to secure the waggons.
koppel_2screw.im and .kin - with screw couplings to secure the waggons.

koppel_sbg.im and .kin is the Scharfenberg couple and sits lower on the waggon.

Taillights and endmarkers are also available in this package.
Please read the guide!

STL NGKoppel 3.11
• config.txt 3.68KB
• koppel.texture.txt 29 bytes
• koppel.tga 768.02KB
• koppel_1chain.im 103.50KB
• koppel_1chain.kin 15.91KB
• koppel_2chain.im 154.66KB
• koppel_2chain.kin 21.39KB
• koppel_2screw.im 121.51KB
• koppel_2screw.kin 18.67KB
• koppel_down.im 88.76KB
• koppel_down.kin 10.42KB
• koppel_sbg.im 19.23KB
• koppel_sbg.kin 3.58KB
• koppel_up.im 88.64KB
• koppel_up.kin 10.42KB
• luft_0_anim.im 31.99KB
• luft_0_anim.kin 5.91KB
• luft_1_anim.im 31.93KB
• luft_1_anim.kin 7.98KB
• luft_off.im 28.54KB
• luft_on.im 28.29KB
• lykta23.texture.txt 30 bytes
• lykta23.tga 48.02KB
• lykta2_h.im 52.52KB
• lykta2_v.im 52.52KB
• lykta3_h.im 35.34KB
• lykta3_v.im 35.34KB
• lykth.texture.txt 28 bytes
• lykth.tga 12.04KB
• screen.jpg 39.76KB
• skarm3.texture.txt 29 bytes
• skarm3.tga 24.02KB
• skarm3_h.im 2.63KB
• skarm3_v.im 2.63KB
• ssh.texture.txt 26 bytes
• ssh.tga 3.02KB
• ssh2_h.im 6.63KB
• ssh2_v.im 6.63KB

Part of the meshes are under Copyright 2009 by The Swedish Train Workshops. All rights reserved.

The contents of this distribution (models, textures, data, etc) is freeware and must not be used commercially in any way. Redistribution and use of this distribution are permitted provided that the following conditions are met:

1. Redistributions must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistribution of this package is only allowed with the autho

VE62: Required container 'mesh-table' is missing.

VE48: This asset uses an obsolete trainz-build number. Trainz-build numbers below 3.5 are no longer supported.