YSC 1a MoW

<kuid2:69871:11985:2>

Map: YardSwitchingCo 1a
Author: philskene
Kind: profile
Build: 2.4
Size: 313.28KB
Uploaded: 2019-09-17
Loadings:
17
-
0
+

YSC 1a MoW

This session is for YardSwitchingCo 1a. You will be setting up Maintenance of Way trains for the work schedule tomorrow. All the items of rolling stock needed by the session will be downloaded from the Download Station when the session is installed.

Chuck and Joe, Saturday evening again. You need to set up the MoW cars for the work tomorrow.

Refuel the steam shovel and the match car with coal at the loco depot before taking them and the gondola over to Matchless Timber. The shovel will be used to remove mud and sludge from the log dump.

The 250t crane is needed for replacing track out on the main line. Pick up the four flat cars from the station spur and load them with rails and sleepers at the MoW Depot. The flat cars will load when stationary between the yellow markers.

Make up the train so that the work car caboose is at western end, and place the whole consist of flat cars, crane and work cars in the Class 1 Transfer Yard, the yard that has track with concrete sleepers.

Take care with that old switch stand in the MoW Depot. Sometime we will get round to replacing it.

You will find that our Class 1 Railroad partner is running a very intensive schedule. You should expect to see their trainz thundering past every two minutes or so. Be very careful where we share their tracks on either side of the main station and when you access their Transfer Yard.

Maps and a readme will be found in the folder containing the session.

Author: philskene

    YSC 1a MoW
  • config.txt 4.08KB
  • profile.dat 271.82KB
  • readme.htm 12.63KB
  • readme.txt 11.76KB
  • yardswitchingco_centre.jpg 89.60KB
  • yardswitchingco_east.jpg 91.20KB
  • yardswitchingco_west.jpg 91.38KB
  • ysc_1a_mow_small.jpg 12.27KB

This is freeware.
Please feel free to experiment with this and modify it to suit your own tastes and needs.
Feel free to distribute this by any means or upload any revised version to the Trainz Download Station or elsewhere.
If you do distribute a revised version of any of my routes, my only requirement is that you use a name for the route other than Austral Bay or Port Ogden & Northern or BesideTheRiver or Mad River Extended or Urban Industrial or Urban IndustRail, or variations of these names.

User photos

No one has added a photo of this object yet