YSC 1a EuroSteam

<kuid2:69871:12095:1>

Map: YardSwitchingCo 1a
Author: philskene
Kind: profile
Build: 2.4
Size: 313.96KB
Uploaded: 2019-09-17
Loadings:
25
-
0
+

YSC 1a EuroSteam

This session is for YardSwitchingCo 1a. All the items of rolling stock needed by the session will be downloaded from the Download Station when the session is installed, apart from the DB 2-6-2T steam locomotive. This can be downloaded from

http://www.virtual-motive-division.com/html/eu_db1.html

Scroll down the page to BR 64 - Bubikopf, download the cdp file and double click this file to install the locomotive.

Achtung Kurt und Steffen, your orders.
Coal and water your locomotive.
In West Transfer Yard you will find MAV Rgs flat wagons loaded with logs, DB Sss-y wagons loaded with lorry trailers and SBB Uaikks well wagons loaded with transformers.
You can perform the following tasks in any order.
Take the Rgs wagons to the Dry Sort Yard and unload the logs on the south side of the Dry Sort Yard. Reload with sorted loads on the northern side of the yard and unload these logs at the log dump at Matchless Timber Products.
Unload the Uaikks at the gantry crane and ramp in the north western corner of the container yard. The transformers will unload in sequence when one well wagon has been stationary between the double yellow markers for one minute.
Unload the Sss-y wagons at the yellow mobile crane in the container yard. The trailers will unload when the wagons are stationary between the triple yellow markers.
Load the Uaikks with round stock at the overhead crane at the western end of Diaspar station.
Load all the Rgs and Sss-y wagons with tank containers on the northern most siding in the container yard. Fill the tank cars with benzene at Conoco Chemicals (note: they will not actually load).
Assemble the train in the West Transfer Yard.
Report for further instructions.

Do not use the concrete sleepered tracks. These will be used by other trains.

Maps and a readme are included in the folder containing the session. The readme contains detailed instructions for driving the steam locomotive in Cab Mode.

Author: philskene

    YSC 1a EuroSteam
  • config.txt 4.38KB
  • profile.dat 271.51KB
  • readme.htm 13.20KB
  • readme.txt 12.30KB
  • yardswitchingco_centre.jpg 89.67KB
  • yardswitchingco_east.jpg 89.92KB
  • yardswitchingco_west.jpg 88.88KB
  • ysc1a_eurosteam_small.jpg 14.94KB

This is freeware.
Please feel free to experiment with this and modify it to suit your own tastes and needs.
Feel free to distribute this by any means or upload any revised version to the Trainz Download Station or elsewhere.
If you do distribute a revised version of any of my routes, my only requirement is that you use a name for the route other than Austral Bay or Port Ogden & Northern or BesideTheRiver or Mad River Extended or Urban Industrial or Urban IndustRail, or variations of these names.

Фотографии пользователей

Еще никто не добавил фото этого объекта