IndustRail 8a SpanYard

IndustRail 8a SpanYard

This session is for Urban IndustRail 8a. You will be crewing a RENFE 242F 4-8-2 steam locomotive that some claim may be the best freeware locomotive available for Trainz. All the items of rolling stock needed by the session will be downloaded from the Download Station when the session is installed, with the exception of the RENFE 242F locomotive and the crane. These can be downloaded from:

http://www.trensim.com/lib/pafiledb.php?lib=trainz&action=file&id=92

and

http://www.trensim.com/lib/pafiledb.php?lib=trainz&action=file&id=68

Click on descargar to download, and then install the .cdp files that are downloaded.

Manuel e Fernando, atencion.
Two freight cars have jumped the track at Armour Meats and we need to get the re-railing equipment from the MoW Depot, pronto.
To save extra trips, load those JSA steel carriers now sitting here in the yard by taking them to the steel wharf. Unload them at Kar Kompany at the overhead gantry crane at the south end of their yard.
You may as well also load the Cartic auto carriers in the Picton Classification Yard at Kar Kompany and unload them at the ramp next to the Teamsters Yard here at Dunedin.
Most importantly, when up north collect that crane and match cars from the MoW Depot. You must also load the bogey bolster with rails in the MoW Depot and load the flat car with Bobcats.
Finally, unload the replacement rails and Bobcats at the site of the derailment at Armour and leave the crane in attendance.
Return to Dunedin loco for further orders.
Class 1 railroad trains will be running at 5 minute intervals on the track with concrete sleepers. You must give way to these trains at all squeeze points.
You are authorised to travel at up to 50mph except in yard areas where normal limits apply.
You are authorised to stop when necessary for locomotive purposes.

Note:
1. To rotate the jib of the crane, mouse click on the crane, make sure NumLock is active, and press the End-key in the numeric keypad.
2. Three yellow markers between the tracks indicate a LARS interactive industry. Individual cars will load and unload when the car is stationary between the markers. Two markers indicate ProtoLARS. Cars will load or unload in sequence when the train has been stationary with one car between the markers for one minute.

Maps and a readme are included in the folder containing the session. The readme contains detailed instructions about getting the best from this locomotive.

Author: philskene

IndustRail 8a SpanYard
• config.txt 5.37KB
• profile.dat 1.72MB
• readme.htm 11.23KB
• readme.txt 10.38KB
• spanyard_map1.jpg 52.43KB
• spanyard_map2.jpg 88.31KB
• spanyard_map3.jpg 90.37KB
• spanyard_small.jpg 14.67KB

This is freeware.
Please feel free to experiment with this and modify it to suit your own tastes and needs.
Feel free to distribute this by any means or upload any revised version to the Trainz Download Station or elsewhere.
If you do distribute a revised version of any of my routes, my only requirement is that you use a name for the route other than Austral Bay or Port Ogden & Northern or BesideTheRiver or Mad River Extended or Urban Industrial or Urban IndustRail, YardShuntingCo, or variations of these