IR 1a AI S bound

IR 1a AI S bound

This session is for IndustRail 1a. All the items of rolling stock needed by the session will be downloaded from the Download Station when the session is installed. You have the choice of driving an Australian steam locomotive or British or North American diesel locomotives. If you choose the steamer, remember to coal and water before leaving the Depot.

The purpose of this session is to allow exploration of the route and to provide a template for AI train operations. In this session all AI trainz are southbound.

If you do want to be helpful, load the flat cars corresponding to the locomotive with round bars at Hymill-Write, between the triple yellow markers under the heavy lift gantry crane. Unload and leave half the flats at Oleo Wire and Cable at Picton, and the remainder at the heavy lift gantry at Fingers Foundry, just before Lys.

Note: Three yellow markers represent a LARS section of track; two ProtoLARS. Freight cars will load or unload when stationary on a LARS section. If one car in the consist has been stationary on a ProtoLARS section for one minute, all freight cars in the consist will load or unload in sequence.

Central Portal Control has been used to configure the portals. CPC can be accessed in Surveyor by clicking on the Edit Session Rules radio button at the top left of the screen, highlighting Central Portal Control in the window that appears, and selecting Edit. Reconfigure as required.

In Driver, click between the brackets at the top left of the screen to configure Set Driver Conditions Rule. This can be used to change the time of day and weather conditions.

Maps and a readme are included in the folder containing the session.

Author: philskene

IR 1a AI S bound
• config.txt 4.40KB
• industrail_map_00.jpg 87.69KB
• industrail_map_01_1.jpg 88.29KB
• industrail_map_01_2.jpg 86.47KB
• industrail_map_01_3.jpg 88.33KB
• industrail_map_02_1.jpg 87.03KB
• industrail_map_02_2.jpg 87.72KB
• industrail_map_03.jpg 87.36KB
• industrail_map_04.jpg 88.43KB
• industrail_map_05.jpg 87.88KB
• industrail_map_06.jpg 87.21KB
• industrail_map_07.jpg 82.13KB
• industrail_map_08.jpg 87.09KB
• industrail_map_09.jpg 87.74KB
• industrail_map_10_1.jpg 88.02KB
• industrail_map_10_2.jpg 87.45KB
• industrail_map_10_3.jpg 88.61KB
• industrail_map_11.jpg 86.97KB
• ir_1a_ai s bound_small.jpg 18.50KB
• profile.dat 2.73MB
• readme.htm 14.17KB
• readme.txt 13.28KB

This is freeware.
Please feel free to experiment with this and modify it to suit your own tastes and needs.
Feel free to distribute this by any means or upload any revised version to the Trainz Download Station or elsewhere.
If you do distribute a revised version of any of my routes, my only requirement is that you use a different name for the route.