Yuan Gulch - Session 2 Afternoon Ore Run

Yuan Gulch - Session 2 Afternoon Ore Run

Yuan Gulch - Session 2 Afternoon Ore Run

This session is for the Yuan Gulch RRCo layout. All the required dependencies are either built-in or from the Download Station.

Important information about this session, in particular the method used to load and unload freight cars and the use of the rotary dumper, can be found in the N3V Trainz Forums. Search for Yuan Gulch.

Chuck and Joe, Yard Master here. Now that you have received instructions on the rotary dumper I have allocated the afternoon ore run to you.
I have also given you one of our steamers for the shift, the Uintah #51. But, if you prefer, you can use the diesel. You might find this easier with the rotary dumper.
On the far side of the dumper you will find a rake of three hoppers. Load with Gilpin Ore at the McClan Mine, the mine up the hill. Load at the northern mine spur.
Dump the ore at the dumper and leave the cars where you found them.
In the yard you will find two empty gondolas. Load them with tailings. (Note: use Smelter Waste as the proxy.)
Go down the switchback to the Dock and unload the tailings into the narrow barge at the Dock Dumper.
Leave the gondolas at the Wharf.
Return to Yuan with the rake of boxcars and reefers.
At Yuan spot the reefers for unloading at the short spur at the Yuan Freight Depot and the boxcars at the Steamship Wharf.
Return to Loco sign off.

Yuan Gulch - Session 2 Afternoon Ore Run
• config.txt 12.99KB
• profile.dat 52.68KB
• profile.lyr 28 bytes
• profile.obs 36 bytes
• profile.rlr 36 bytes
• profile.trk 68 bytes
• thumbnail.jpg 128.19KB