Autopilot Rule

Autopilot Rule

This rule makes it possible to activate the autopilot on trains without drivers. It must be added to the session in Surveyor. There are five different options in the configuration menu:
- start autopilot on all trains
- start autopilot only on trains that have drivers
- start autopilot only on trains that have no drivers
- start autopilot on user selected trains
- don't start autopilot on any train

In conjunction with the autopilot driver command it is possible in a session to control which trains have the autopilot enabled. The rule discovers if a driver receives an autopilot command. After a driver leaves his train the rule activates the autopilot on the now unattended train. If the driver moves to a train with activated autopilot an autopilot command is automatically added to the driver's schedule. To disable the autopilot it is just necessary to quit the command.

Special thanks to André Vaillancourt for the french translations.

Author: Martin Hammel (_mutton_)

Autopilot Rule
• autopilot.texture.txt 54 bytes
• autopilot.tga 8.02KB
• autopilot_rule.jpg 9.82KB
• autopilotrule.gse 3.74KB
• config.txt 5.54KB
• larrow.tga 690 bytes
• larrow_hl.tga 690 bytes
• radio0.tga 802 bytes
• radio0_hl.tga 802 bytes
• radio1.tga 802 bytes
• radio1_hl.tga 802 bytes
• rarrow.tga 690 bytes
• rarrow_hl.tga 690 bytes
• rbtree_int.gse 2.75KB
• utils.gse 483 bytes

Copyright (c) 2004 Martin Hammel

This package may be distributed freely, as long as the package's content is not altered and no fees are charged. It is not allowed to reuse parts of the package like, but not limited to, bitmaps or scripts, in other projects.

This package or parts of the package must not be used in or distributed together with products that are charged like, but not limited to, so-called "payware" without express permission of the author.

The package is provided on an "as is" basis,

VE48: This asset uses an obsolete trainz-build number. Trainz-build numbers below 3.5 are no longer supported.