VR NG Timber Trestle Bridge Kit - Decking

VR NG Timber Trestle Bridge Kit - Decking

This is a typical Victorian Railways Narrow Gauge Timber Trestle Bridge based on the official drawings issued by the VR Ways and Works department. In a manner similar to the VR Timber Trestle Bridge by the same author (available separately), this asset is divided into several parts designed to snap together as a kit to form a bridge of any length and up to a maximum of 40 feet/12 meters above the ground. This is the decking portion of the bridge, provided as a spline of otherwise individual 20 foot/7 meter spans, designed to create the intended bridge, itself. Because this spline asset has no end caps, it MUST be attached to the 'VR NG Timber Testle Bridge Kit - Abutments' - one at each end of the spline, suitably placed and rotated to provide a securing point for the spline (and a suitable 'end' for the bridge). It is also prelaid with an appropriate type of track, in the form of the VR 60Lb NG Track (no embankment) by Azervich - <kuid:4040479:38193>, whose asset kuid has been added to the kuid-table container of this asset. As this Bridge spline makes use of 'mesh stitching', it is subsequently unsuitable for use in Trainz builds lower than 2.9.

Author: Jerker [75943]

VR NG Timber Trestle Bridge Kit - Decking
• $screenshot$.jpg 22.85KB
• config.txt 3.37KB